[BRAND SPECIFIC][TOSHIBA]

Service/Designer Menu

<< Back to Main Toshiba Tips

• Service Designer Menu

  • Accessing the Service and Designer Menus

  • Offset Parameters Demystified - A bit lost reading Cheezmo's and Stephen Smith's Charts?   Find out the what, why, and how.

  • Adventures in Designer Mode by Michael TLV

  • H80 ADDR Codes - Early attempts by Tom Herman, Stephen Smith, & DougH to access the locked Designer menu of later generation sets

  • 20AF41/24AF41 - How to enter the Direct view service menu

  • European Sets
    - Toshiba 43PJ93G
    - Hollywood 56WH08G

• Convergence

  • Remote control buttons - Handy reference when doing your convergence adjustments

  • Resetting convergence - Good starting point when tweaking convergence

  • Convergence Grid - Simplify geometry and convergence adjustments using a template.

  • Procedures for convergence, geometry setup, and mechanical alignment by Tom Herman

  • How to get convergence Dead-on

  • How contrast affects convergence and other warnings from Mr Bob

  • Avoid Convergence Grid Burn-in by Michael TLV

  • 65H80 & 61HX70 convergence/designer mode workarounds

  • 40H80 convergence tip on remote buttons

  • Blue Focus Adjustment - Tighten up/narrow down that blue grid during convergence by Mr Bob

• Geometry

  • Perfect Geometry - Getting perfect geometry IS possible

  • Geometry Defaults on a TW65x81
    - Excel file shows the settings that affect geometry.   It also highlights values that are linked to other modes (e.g., adjusting Full rests other modes) by Jean W
    - Dowload it here

• Miscellaneous

  • Anamorphic Squeeze
    - How to do it (general description) by Michael TLV
    - On a 55HX70
    - On a 32A41

  • CRT Astigmatism Adjustment

  • 3:2 Pulldown by Michael TLV

  • One Button Home Theater Preference by Tom Herman

  • Reigning in the Toshiba Contrast by Michael TLV

  • Scan Velocity Modulation
    - How to disable it
    - SVM and Theater Mode by Michael TLV

  • TW3 Vertical Blanking Fix - Bottom half of TW3 missing?  Here's how to restore it.

• Factory Settings -  Note that all tv sets regardless of brand/model come with different factory settings.  Info below are being offered by other owners for comparison purposes only.  Always always always record your set's defaults before making any changes!

  • Default/Offset Charts factory settings collected by Stephen Smith.
    - Download it - Site 1 (this is the latest and greatest)
    - Download it - Site 2 (may not be as current as site 1)

  • TP61H95 Service/Designer Mode Settings
    - Info from Mike Suave
    - Input from Tom Herman (Word file)

  • TW65H80 Design Mode Values - Codes and offset by Cheezmo

  • 61H70 Defaults - Factory settings

  • TW56x81 & TN55X81Defaults - Factory settings from owners

  • CW34x92 Defaults - untouched factory settings from Designer mode by Peter Labrie

  • 7076 DD European set - settings offered by Martin Gumhold

Contents © Copyrighted by Keohi HDTV.  All rights reserved.